Monthly Archives: February 2019

Smart Colour Stain

This question was asked by
Chris James

Can this be applied to fresh concrete (ie 6 days old)

It is recommended that newly laid concrete is left to cure for 30 days before applying a stain to the surface, the moisture evaporating and the chemical reaction taking place as the concrete cures can cause the stain to fail and lift.

Drew Palin

Concrete staining

This question was asked by
Kate van den Driessche

Hello,

I would like to discuss options for staining a poured, polished concrete floor with a brass inlay design. The floor was exposed to a leak 12 months ago and as a result has a number of cracks and ‘pigment picture framing’ that is an eye sore. We are exploring options of replacing the whole floor, but I would like to understand what finish we could achieve with filling cracks and staining the whole area. Could you please contact me to discuss further.
Many thanks,

Kate

Hi Kate
we can definitely help you with this, we just need some pictures so we can establish exactly what the problem is and recommend remedial work .
Could you send those to drew@adseal.info

Michael Palin

Smart Colour Stain

This question was asked by
Jason watts

Hi, is it possible to create a virdgres pattern on my new concrete workshop with your colours, if so can you list what I will need to cover 6 square meters. I will require prep stuff stain and sealer. Also would you be so kind as to include the total price , many thanks.

Hi Jason
I’m sure we can help you with this. the person you need to speak to will be available at the end of next week and will contact you.

Michael Palin

Endura Faux Fusion

This question was asked by
John Fathers

Hi, I have recently laid new concrete and plan to grind and polish shortly. Could I mix the above with the densifier at the polishing stage.
I am looking to get a random density of a colour as a finish. If not is there another product I could use inj this way.
thanks in advance

Hi John
yes you can mix the Endura faux Fusion with the densifier at the polishing stage
We strongly recommend you do a small test area first though

Endura Faux Fusion (EFF)

Michael Palin

Price and quantity required

This question was asked by
Darren Wood

Afternoon,

can you please supply me with a cost please for the Water Based Sealer Matt,

I need to cover approx 60sqm’s and apply 2 coats.

Also can you advise on delivery times to site.

Regards

Hi Darren
we’d suggest you get a 15 litre container to be safe
Approx 8 m2 per litre depending on surface porosity

Water Based Sealer Matt (WB25)

Michael Palin

internal concrete wall

This question was asked by
Amanda Aleksova

Hi, I am currently resnovating a property abroad and wondered if the water based gloss sealent would be suitable, as it is water based I wouldnt be restricted from carrying it in my luggage. I would like the concrete wall to have a glossy finish, please could you advice
Thanks
Amanda

Hi Amanda
this is a link to the product that will help you with your internal wall

Endura Solid Stain (ESS)

but you will need to check with the authorities about taking it on board as we don’t have any information about that.

regards

Michael Palin