Home :: Polishing and Grinding :: Nano Lithium Densifier / Hardener

Nano Lithium Densifier / Hardener

Nano Lithium Densifier / Hardener
grind and polish Australia_Polishing_2 Aust._Densifier_and_Protector_Plus Australia_Polishing
SKU NANOLDP5
Weight 5.00 kg
Our price: £82.39
including VAT

Excluding VAT £68.66
NanoSizes
Qty Out of stock

Deep penetrating hardener/sealer with high lithium content ideal for densifying and adding surface finish during grinding process or for an improved cure on newly laid concrete

18

Ask us a question

A penetrating hardener, modified with 100% polymer resin with a special surfactant for fresh and old concrete.  Creates a curing membrane for uniform hardening of fresh concrete. Has a CE MARKING

Adseal NANO-LITHIUM properties are deeper penetration, faster installation and reduced reaction times but also creates a curing membrane for even hardening of fresh concrete – cannot peel or flake.

Recommended for hard and tightly trowelled concrete .

Binds loose, friable and porous mineral substrates whilst hardening structure and binding dust.

    • Increases the compressive strength of the concrete by as much as 25%
    • Increases abrasion resistance about 2.5 times
    • Virtually all abrasion dust is eliminated
    • Excellent resistance to freeze thaw cycles
    • Greatly increased resistance to dirt, making cleaning and maintenance easier
    • Treated area can be polished if required
    • Treatment is permanent and protects underlying substrate from
      detergents, motor oil, petrol, transmission fluid, solvents, de-icing and other common chemicals

Used on paving, floors and walls including

      • Concrete bridges
      • Tunnels
      • Walk-ways
      • Retaining walls
      • Hard-standings
      • Car-parks
      • Car washes
      • Harbours
      • Airports
      • Factories
      • Agricultural buildings
      • Parking decks
      • Driveways & paths
      • etc..

And other high traffic areas

      • Factory floors
      • Storage areas
      • Distribution depots
      • Warehouses
      • Workshops
      • etc..

Suitable for use on mineral substrates such as concrete, stone and plaster and can be coloured with Adseal NANO-Colour. Use also on lime paints to convert the surface into a hard, ceramic like, coating, which, after reaction, cannot peel, or flake.

Simple and cost effective to apply. Zero VOC, non-flammable, no odour and safe to use. For use both indoors and outdoors. This product has a CE marking

DOUBLE CONCENTRATED – dilute 1 : 1 with water yields 12% solids –higher than industry standard of 8%

Dilution rates
Very hard surfaces 1 : 2 water
Hard 1 : 1
Normal 1 : 0.5
Soft Neat

Faster cure rate accepts pedestrian traffic after 1-2 hours and light vehicles after 24 hours. The most suitable hardener for polished concrete. Recommended for hard, tightly trowelled concrete. This product has a CE marking

Application rate: Normal surface 6-8 m²/litre
[depending on porosity] Power floated surface 10-15 m²/litre

Available in 5 litre & 20 litre containers

For instructions on creating a fabulous polished concrete floor click here

Ask us a question

Technical Data Sheet

Technical Data Sheet  

Application Instructions

Application Instructions  

Ask us a question

Safety Data Sheet

Safety Data Sheet
Ask us a question

Features & Benefits

  • Binds substrate and dust
  • Hardens concrete
  • resistance to freeze thaw cycles
  • increased resistance to dirt
  • making cleaning and maintenance easier
  • Treated area can be polished
Ask us a question
Available in these sizes

20L concentrate, 5L concentrate

Ask us a question
NANOSET Colour
£68.05
Ask us a question
Click here to see more FAQs about Nano Lithium Densifier / Hardener

Nano Lithium

This question was asked by - Roger Jackson
I have applied Adseal Nano Lithium plus densifier to a concrete garage floor and I believe I've used enough for a complete penetration. However, are there any adverse consequences in using a second application after first has dried (to ensure full penetration). Will the second application actually penetrate or will the first application prevent it? Thank you.

You are fine to apply multiple coats of the Densifier.

Drew Palin

Click here to see more FAQs about Nano Lithium Densifier / Hardener

Ask us a question